Care & Installation Guide
At Motor Circuits 3D, every product is made to order using 3D printing technology and carefully prepared before shipping.
To keep your piece in the best possible condition, please follow the care and installation recommendations below.
Indoor Decorative Use
Our products are designed for indoor decorative use only.
They are intended to be used as wall art or decorative display pieces.
They are not toys and should not be used by children without adult supervision.
Wall Mounting
Adhesive, glue, double-sided tape or wall mounting accessories are not included with the product.
Our 3D printed wall art pieces are lightweight and can usually be mounted using simple removable adhesive strips, double-sided tape or another suitable wall-safe fixing solution.
Before applying the product to the wall, make sure the surface is:
- Clean
- Dry
- Smooth
- Free from dust, grease or humidity
Please choose a fixing method suitable for your wall type and follow the instructions provided by the adhesive or mounting product manufacturer.
Motor Circuits 3D is not responsible for damage caused to walls, paint, wallpaper or other surfaces during installation, removal or use of third-party adhesive products.
Recommended Surfaces
For best results, install the product on a smooth and clean indoor wall.
Suitable surfaces may include:
- Painted smooth walls
- Wooden panels
- Smooth doors
- Smooth furniture surfaces
- Other clean and stable indoor surfaces
Avoid installing the product on:
- Rough or textured walls
- Dirty or dusty surfaces
- Humid surfaces
- Freshly painted walls
- Fragile wallpaper
- Surfaces exposed to heat or direct sunlight
If your wall surface is delicate or uneven, we recommend testing your adhesive solution first in a small hidden area.
Heat and Sunlight
3D printed plastic can be sensitive to high temperatures.
To prevent deformation or warping, please avoid placing the product:
- Near radiators or heaters
- Near fireplaces
- Inside cars
- In direct sunlight for long periods
- In areas exposed to high heat
Cleaning
To clean your product, gently remove dust with a soft, dry cloth.
Do not use:
- Hot water
- Solvents
- Abrasive products
- Strong cleaning chemicals
Avoid rubbing delicate parts too strongly, as some sections of the design may be thin or detailed.
Handling
Please handle the product with care.
Some parts of the design may be thin, detailed or delicate due to the shape of the circuit or decorative element.
Avoid bending, dropping, twisting or applying force to the product.
3D Printing Characteristics
Our products are made using 3D printing technology.
Small layer lines, minor surface variations or slight colour differences may occur as part of the normal 3D printing process.
These characteristics are not considered defects, provided that the product is correctly produced and visually consistent with the design.
Need Help?
If you have any questions about how to install or care for your product, please contact us at:
contact@motorcircuits3d.com
We will be happy to help.